The TELSTAR Videotex System
PLEASE NOTE THAT FROM 10TH NOVEMBER 2020, PSTN ACCESS TO TELSTAR, INCLUDING THE TELSTAR PAD, WILL BE TEMPORARILY SUSPENDED DUE TO AN OFFICE MOVE. THIS WILL BE REINSTATED ONCE THE MOVE IS COMPLETE. PSTN ACCESS IS EXPECTED TO BE UNAVAILABLE FOR AT LEAST FOUR WEEKS. PLEASE ACCEPT MY APOLOGIES FOR ANY DISAPPOINTMENT.
The TELSTAR videotex system, developed in 2018, is a modern application that provides a simple viewdata/videotext platform similar to those that were prevalent during the 1980s such as Prestel (https://en.wikipedia.org/wiki/Prestel).
The aim of the system is to provide a Viewdata experience for anyone who is interested in how things 'used to be'. Services in the past typically provided access via the public switched telephone network (PSTN) connection and this is indeed how Telstar works, however, Telstar also makes use of a simple internet connection for modern internet modems.
The service can be accessed using a traditional V23 modem or an internet modem in conjunction with a home computer. In the case of the BBC Microcomputer, Acorn's Prestel adapter can be used. In addition access can be gained from from a PC or Mobile device using Richard T Russell's BBC Basic for SDL 2.0 or Matrix Brandy BASIC V for Linux. Access can even be gained from the web thanks to the efforts of Simon Laszcz (see below).
For a full up to date list of content available through Telstar, please se the TELSTAR Directory.
- 1 Introductory Videos
- 2 Connecting and Using the Service
- 3 What's in a Name
- 4 Hardware and Software
- 5 Telstar is not Telnet
- 6 Baud Rate
- 7 Content
- 8 Navigation
- 9 Telesoftware
- 10 Copyrights and Trade Marks
- 11 Colossal Cave Adventure
- 12 Meta-Data
- 13 Screen Roll Over
- 14 Technical Information
- 15 Acknoledgements
- 16 References
- 17 See Also
Connecting and Using the Service
The service can be accessed using a vintage computer such as the BBC Microcomputer, Apple II (II+///e etc), Torch or Archimedes etc. There are several ways in which TELSTAR can be accessed.
PSTN Calling Direct
Dial in service using a 1200/75 full duplex V23 modem:
Baud Rate: 1200/75 full duplex Word Length: 7 Parity: Even Stop Bits: 1
The telephone number for direct access is:
PSTN via Packet Assemmbler Disassembler (PS/PAD)
Dial up access to Telstar can also be made via the Network PS/PAD (see Accessing an Internet BBS over Dial-up (PSTN)) on the following number using the same settings as above:
At the PAD prompt use the CALL command as follows:
PAD> CALL TELSTAR
The HOSTS command will show the internal PAD directory e.g.
PAD> HOSTS Name: TELSTAR Name: NXTEL Name: CCL4 Name: CAVE Name: PARTICLES PAD>
Internet service using a network modem (see below) set as follows. Telstar is listening on the following endpoints:
Baud Rate: 1200/1200 full duplex Word Length: 8 Parity: None Stop Bits: 1
What's in a Name
There are three instances of the TELSTAR service, these are named 'CURRER', ELLIS' and 'ACTON' respectively, see the article Telstar: What's in a Name. The first two are identical and are available at the following addresses.
Url: glasstty.com Port: 6502
Url: glasstty.com Port: 6503
The third service is used to test new features and may be subject to short periods of interruption.
Url: glasstty.com Port: 6504
Please Note that these endpoints are not Telnet Servers nor Web Servers, they are simply TCP listeners that support the videotex application protocol.
Hardware and Software
BBC Micro, Sinclair Spectrum, Apple II, DOS and other Vintage Systems
A vintage home computer requires suitable videotext software. Software designed for use with Prestel will usually work with Telstar, packages are available for the BBC Micro such as Commstar or Acorn's Prestel software. The Apple II/II+ is supported with Antelope, and Gazelle can be used with the later Apple II machines and the package DataTalk can be used on DR DOS/MS DOS machines. Other software packages produced in the 1980-90s exist for other systems.
Network modems generally require that the software supports the same baud rate for send and receive which may limit the choice in some cases (see below).
Most V23 (1200/75 baud) modems or dedicated videotex terminals will work with Telstar's dial in service on 01756 664433, in the case of the BBC Microcomputer, this includes the Acorn Prestel adapter. The system has been tested with the following devices:
- Acorn Prestel Adapter\
- Miracle W2000 Modem
- Pace Nightingale Modem
- Prism Modem 1000
The Prism VTX 5000 system for the Sinclair Spectrum works well, however, Manual Log ON should be selected and 10 asterisks should be entered when the New ID No is requested (See Micronet documentation for details).
- Tandata TD1616
Suitable modems include the Wifi based solution from Daniel Jameson, see the article (http://www.amibay.com/showthread.php?99878-WiFi-retro-Modem-for-under-a-tenner). Alternatively consider a WiModem232 (https://www.cbmstuff.com/proddetail.php?prod=WiModem232OLED). For a simple do-it-yourself solution the Arduino based device described in the article Building an Arduino Based TELSTAR Modem could be used. For a better experience using one of these modems, please see the article Using an Internet Modem For Telstar and the section #Telstar is not Telnet
TcpSer is a utility that can be used to make a computer behave as if it were a modem. For example, by installing TcpSer on a Raspberry Pi and connecting a USB serial port adapter to the Pi, the Raspberry Pi can easily be made to behave like a Hayes compatible network modem. Another machine running terminal software can then be connected to the Pi's serial port using a null modem cable.
Telstar can be accessed using RiscOS on modern hardware, such as a Raspberry Pi, using software written by David Pilling called Hearsay II (https://www.davidpilling.com/hearsay.html), see screenshot below right. This package has been updated to include direct TCP connections. This allows the software to be connected directly to Telstar by simply entering glasstty.com, 6503 when prompted. Naturally this will require a DNS server to have been configured within RiscOS. Alternatively the IP address of glasstty.com can be used.
Windows, Linux, Mac OS-X, IOS, Android and Raspberry Pi
To experience Telstar properly it needs to be accessed by an early microcomputer for the videotex era. However, there are several methods of accessing the service using modern devices.
Richard T Russell has written BBC BASIC for SDL 2.0 (https://www.bbcbasic.co.uk/bbcsdl/) which is available for desktop (Windows, Linux, Mac OS-X, Raspberry Pi) and mobile devices (Android/IOS). This product includes a Telstar client within the General section of the included examples.
Matrix Brandy is a fork of Brandy Basic, a BBC Basic V interpreter written by David Daniels and distributed under the GNU General Public Licence Version 2. It was Developed on a CentOS 6 32-bit machine, tested on both CentOS 6 64-bit and a Raspberry Pi. Matrix Brandy BASIC V for Linux with SDL can be found here (http://brandy.matrixnetwork.co.uk/), it includes a 'Telstar' client compiled as a Windows executable http://brandy.matrixnetwork.co.uk/testing/telstar.zip.
Simon Laszcz has kindly provided a web interface to Telstar and other videotex systems here https://vd-view.azurewebsites.net/.
Telstar is not Telnet
Whilst TELSTAR is accessed using TCP/IP it is not a Telnet Server. However, TELSTAR does include a Telnet parser which will respond to a very small subset of Telnet negotiation requests.
When a client first connects, TELSTAR attempts a simple negotiation with the client to establish two protocol settings;
- to ask the client to not use line mode;
- to indicate that the server will echo any characters received,
Non-Telnet clients can safely ignore this negotiation request completely.
TELSTAR is designed to operate at 1200 baud when accessed by non-Telnet clients (see below), this speed is set at the server.
Why is Telstar Throttled to 1200 Baud?
This is probably the most common question asked in relation to Telstar. There are two main reasons why throttling exists.
- Prestel was 1200 Baud - This is not strictly accurate of course, it was the modems most commonly used with Prestel that received at 1200 baud, Prestel had a 300 baud service and other speeds were sometimes used for editors and administrators etc.
One of the aims of Telstar was to recreate the feel of an online system such as Prestel the near instant access but slow rendering of pages sets it apart from Teletext page displays of systems such as Ceefax and Oracle.
- Menu Navigation - The way in which menus were navigated on a Prestel type system was primarily through single key presses, e.g. '2' for the News Menu followed by '1' for BBC News etc. A user pressing '2' for the News Menu could immediately follow this by pressing 1 for BBC News and this would cancel the rendering of the News Menu and invoke rendering of the BBC News page. This may seem trivial today but this syetem worked really well and I particularly wanted Telstar to behave in this way to give users the full experience. This is only really possible with Telstar running at a throttled speed.
I want to go Faster!
Whilst TELSTAR is accessed using TCP/IP it is not a Telnet Server. However, TELSTAR does include a Telnet parser which will respond to a very small subset of Telnet negotiation requests. see #Telstar is not Telnet.
If Telstar identifies the client as a Telnet client, the system will run at full speed. Non-Telnet clients can safely ignore this negotiation request completely. If you are writing a client and you want full speed access, simply send something like FF FD 03 after connecting. This is the IAC DO SUPPRESS-GO-AHEAD sequence.
For example Richard Russell's BBC Basic client uses the following code just after successfully connecting.
REM Start the telnet negotiation: init$ = CHR$255 + CHR$253 + CHR$3 : REM IAC DO SUPPRESS-GO-AHEAD PROCout(init$)
Similarly if you want to use Richard's client at the 1970/80s speed then simply remove that sequence e.g.
REM Start the telnet negotiation: REM init$ = CHR$255 + CHR$253 + CHR$3 : REM IAC DO SUPPRESS-GO-AHEAD REM PROCout(init$)
For a full list of the content available please see the TELSTAR Directory. This is currently a 'work in progress' and will be expanded as the content is developed.
There are four main sources of content, these are described below.
Currently the system takes several live feeds from the BBC, Reuters, Daily Mail, Express, Stardot.co.uk and others. This provides current and automatically updated news and financial information as well as information relating to arts, culture, sport etc. The data is typically refreshed every 10 minutes.
Some static content is provided, this includes index and routing frames as well as those encoded frames used for Telesoftware.
External API Content
Some content is created by accessing external APIs. For example, the Weather service accesses the OpenWeatherMap API.
Telstar has a simple gateway facility see #Technical Information that allows content from other systems to be presented within Telstar, one such source is the Colossal Cave Adventure game. The adventure game is actually run on a separate server to that of Telstar with the interactive content passing through the gateway service.
Routing is loosely based on the Prestel system, where navigation can take place by following the menu system, additionally, direct access to a page can be gained by using the special combination shown below.
*<page number># e.g. *890#
Some special combinations allow for pages to be redisplayed of for navigation to a previous page as follows;
*00 Re-display current frame. *09 Re-diaplay current frame (included for compatibility). *# Navigate to the previous page.
Routing by default follows the pure approach, e.g. if the user is viewing page 2 and selects a 1, page 21 will be shown. This is not always appropriate therefore, a Routing Table can be associated to each frame. In cases where the pure routing method is inappropriate e.g. in the above example where pressing 1 should route to page 800 the Routing Table will define this. This means that when following the menu selections pages, data from different information providers can be displayed. This mimics the original Prestel Cross Referencing service and allows full interlinking of content.
Prestel used to have a three frame history allowing the special sequence *# to move back up to three frames. Telstar has a 100 page history accessed in the same manner. All other special sequences used by Prestel are supported.
The protocol used for Telesoftware is described in the document File:Prestel Telesoft Protocol Low Res.pdf.
The provided TEST program is a tokenised BBC BASIC program aimed at providing a simple mechanism for users to test their respective client systems.
More software will be published as it becomes available.
Copyrights and Trade Marks
It is the aim of TELSTAR to respect all copyrights and trade maeks. Please let me know if you are affected by any software and content that is published on the system or this site.
Colossal Cave Adventure
TELSTAR, via its #Technical Information can now access the famous 360 point version of Colossal Cave Adventure.
Colossal Cave Adventure (also known as ADVENT, Colossal Cave, or Adventure) is a text adventure game, developed originally in 1976, by Will Crowther for the PDP-10 mainframe. The game was expanded upon in 1977, with help from Don Woods.
Telstar sends meta-data in a short text response just prior to the first frame being sent and allows clients to automatically update system clocks etc. The meta-data (UTC Date and time only at the moment) sits between the first character 0x0C and a subsequent 0x0C. The char 0x0C is a clear screen character which means that normal users of the system will not see this data, however, clients will.
The first data received from Telstar will look something like the following:
The date and time in UTC is shown as follows 20180720T1007Z, meaning 10:05, 20 July 2018 UTC.
PLEASE NOTE, this is only appears on the initial page (page 99), however this page can be re-displayed at anytime by accessing page *99#.
Screen Roll Over
Videotex clients do not normally scroll. When the cursor is positioned below the bottom row it appears on the top row, similarly a cursor that is moved up from the top row will appear on the bottom row. The same is true for left and right cursor movements. In line with historic videotex services, Telstar uses this behaviour to calculate the shortest path when positioning the cursor. For example if a status message is to be displayed on the bottom row, and the cursor is currently on the top row, Telstar will move the cursor up as this is the shortest route to the bottom row. For developers creating videotex clients, this will need to be taken into account.
Application and Data Servers
TELSTAR consists of three separate services running on Digital Ocean's cloud based Linux servers. These are located in the London data centre. Each service can handle multiple simultaneous connections thereby supporting many users. A MongoDB Atlas database cluster holds all of the Telstar frames for all systems and is hosted on the Google Cloud Platform (GCP) in the Belgium data centre.
The Telstar API is accessible to third parties and can be used to add and maintain content for information providers or for individual user sections within the 8009001 - 8009998 page range. To access this API a User ID is required and, as the system uses an IP whitelist process, a fixed IP address. The API is a simple REST api, more details can be found at https://glasstty.com:8080
[June 2020] Please note that the API is experimental at the moment full details of the API and how to obtain authentication credentials will be available shortly.
Multiple Dowty Quattro modems are connected via analogue telephone adapters (ATAs) to Session Initiation Protocol (SIP) based telephone lines to provide a dial-in service. These modems use a Modem Gateway to connect to the Telstar services.
A modem gateway running on an Arch Linux server is located in Skipton, North Yorkshire and routes incomming dial-in connections to the Telnet services. Multiple lines are supported.
All of the server and gateway software is written in Python 3. Dynamic content frames e.g. News, FTSE etc. are refreshed every few minutes and stored in a MongoDB database as JSON documents. Some frames are memory resident only for example the results of the weather forcast are dynamically created in memory when the results of the weather query are returned. These are added to the routing engine and are treated in the same way as frames retrieved from the databse.
Routing is mainly rules based and makes most routing automatic. Others make use of a static routing tables associated with each frame. In addition a page map is loaded into memory when the TELSTAR service starts which allows page redirections to be implemented.
Zero Page Routing
Telstar pages can each have a maximum of 26 frames. E.g. Page 222 includes frames 222a to 222z. In some cases such as large Telesoftware programs or large numbers of news items this may not be enough. To handle these scenarios, Telstar implements Zero Page Routing which adds a zero to the page number to allow additional frames to be added.
If a Telesoftware program used 28 frames starting at frame 8002a, 8002z would represent frame 26 and two more frames would be needed to complete the transfer. Zero Page Routing would number frame 27 as 80020a and frame 28 as 80020b. If the program was large enough, Zero Page Routing can continue to add new pages e.g. 800200a-z, 8002000a-z and so on.
Alphagraphics and Blobs
Telstar implements Alphagraphics as used on Prestel. Alphagrahics provide a large font created using graphics characters. These are typically used for titles and are automatically generated from text. One example of the use of Alphagraphics is the Guardian news pages.
Blobs are a technique used by Telstar to take sections from one frame and use them in another frame. Any part of a frame can be specified for use on another. In addition these blobs can be concatenated with others and with Alphagraphics to produce larger blobs. This is how the Guardian logo and the Alphagraphic text is automatically created on the Guardian news pages.
TELSTAR features a full duplex 'proxy' Gateway to other viewdata. At the time of writing it is possible to 'gateway' to CCL4 (Tetrachloromethane), NXTEL, and TEEFAX. In addition, it is also possible to access some none viewdata systems, see #Colossal Cave Adventure below.
TELSTAR includes the facility to present forms to the user requesting input. The frames are referred to as response frames. The first use of this functionality was for the city/town/region search facility for the weather service. Response Frames are defined as standard Frame but include a collection of Fields. The fields include field validation and rendering information and are passed to a Response Processor when submitted by the user. The Response Processor handles the users request (e.g. get weather info) and generates temporary in-memory frames to display the results.
- OpenWeatherMap https://openweathermap.org
- Darren Storer http://www.g7lwt.com/
- Richard T Russell http://www.bbcbasic.co.uk/index.html
- Daniel Jameson https://stardot.org.uk/
- Rob O'Donnell https://viewdata.org.uk
- Dave E J Hitchins
- Dave Banks https://github.com/hoglet67/
- 'dukkie' http://stardot.org.uk/forums/memberlist.php?mode=viewprofile&u=10052
- Application Servers - Digital Ocean (https://digitalocean.com)
- Database Servers - MongoDB Atlas (https://mongodb.com)
- SIP Services - Sipgate (https://sipgate.com)
- Analogue Telephone Adapters - Grandstream (https://http://www.grandstream.com/)
- Modems - US Robotics Courier. (https://www.usr.com/products/56k-dialup-modem/usr3453c/)
-  Fedida, S. & Malik, R. (1979) The Viewdata Revolution Associated Business Press
-  Martin, J. (1982) Viewdata and the Information Society Prentice Hall
-  Money, S.A. (1979) Teletext and Viewdata Newnes
-  Stokes, A. (1980) Viewdata: a public information utility (2nd Ed.)
-  Council for Educational Training (CET) (1986) Format Recommendations for Prestel Telesoftware CET
- BBC BASIC V with Telstar client (http://brandy.matrixnetwork.co.uk/)
- BBC BASIC for Windows and SDL 2.0 with Telstar client (http://www.bbcbasic.co.uk/bbcsdl/)
- Stardot Forums / Retro software / Projecte (https://stardot.org.uk/forums/viewtopic.php?f=53&t=14957)
- Raspberry Pi client for the TELSTAR service (https://www.raspberrypi.org/forums/viewtopic.php?t=217377)
- Format Recommendations for Prestel Telesoftware (https://glasstty.com/wiki/images/e/e6/Prestel_Telesoft_Protocol_Low_Res.pdf)
- The Teletext Facegroup Group (https://www.facebook.com/groups/TeletextGroup/)
- Telstar on Twitter (https://twitter.com/johnnewcombeuk)
- Hearsay II for RiscOS by David Pilling (https://www.davidpilling.com/hearsay.html)
- Simon Laszcz's vd-view. (https://vd-view.azurewebsites.net/)